Mount screw used in the Mobius "Pro" packages. This is a special thread forming screw for plastic; #2 x .50 inch lg. It's special tri-lobe design insures a strong hold and allows for repeated insertions without stripping. Notes: Zinc plated; #1 Philips driver required for proper fit. Package Includes: (2) #2 x .50Lg mount screws

This replacement lens allows you to replace your damaged standard "A" lens or convert your C2 lens Mobius. Note: opening of the camera case and re-focusing procedure required. (see below) Package includes: (1) Mobius Standard "A"  lens/filter assembly (1) Hex Wrench Replacement Procedure: General Good Practice when handling electronics, Must read before starting; whenever handling electronics,

This replacement lens allows you to replace your damaged standard "A"  or "A2" lens or convert your C2 lens Mobius. Note: opening of the camera case and re-focusing procedure required. (see below) Package includes: (1) Mobius New Standard "A2"  lens/filter assembly (1) Hex Wrench Replacement Procedure: General Good Practice when handling electronics, Must read before

This replacement lens allows you to replace your damaged C2 lens or convert your standard "A" lens Mobius, or Mobius-90 camera to a wide Angle camera. Note: opening of the camera case and re-focusing procedure required. (see below) Package includes: (1) C2 Mobius Wide Angle lens/filter assembly (1) C2 Wide Angle lens cover (1) Hex

This Super Capacitor is used to replace the standard LiPo battery that come in the Mobius & Mobius2 camera (will not fit Mobius Mini). The Super Capacitor is useful and suggested when using the Mobius ActionCam as a driving recorder where continuous power is supplied to the camera during operation. LiPo batteries don't respond well

This is the new higher capacity(820mah) replacement battery for the Mobius camera. With this increased capacity battery the Mobius can now record over 2 hours of awesome HD video. Battery fits into any of the existing Mobius cameras housings. Battery can be changed by removing (2) screws on bottom, front of case, sliding and lifting

Using this Lens Extension Cable allows the Mobius Lens/Sensor assembly to be remotely mounted from the actual camera housing. This is great for applications where the camera can't be physically mounted or where you don't want the camera to be seen. Note: requires opening the Mobius case and handling the small flat flex cable and

Testing the Weather Cover for the Mobius Wide Angle Camera This silicone Weather Cover keep the Mobius ActionCam clean and dry in messy conditions such as rain, snow, mud, dust, etc. Yet allows activation of the buttons as well as visibility of LED's. The cover also helps to protect your camera from shock or impact from

This silicone Weather Cover with replaceable windows helps keep the Mobius ActionCam clean and dry in messy conditions such as rain, snow, mud, dust, etc. Yet allows activation of the buttons as well as visibility of LED's. The cover also helps to protect your camera from shock or impact from dropping. It also aids the camera

Do I need a Shielded Mobius Camera case? Read full description, details and test results here. Already have a Mobius and want a shielded camera? This package allows you to move the components from your camera and assemble them into this shielded case; you now have a shielded camera! If you are looking for a

This replacement lens allows you to replace your standard “A” or Wide Angle (B or C2)  lens of your Mobius, or Mobius-90 camera turning it into a Zoom/magnification Mobius camera. The Lens has an 8x zoom/magnification. (see sample compare image below)           This lens consists of high quality glass elements and

This lens/sensor assembly is the same as is shipped in our Standard lens camera packages. It is intended to be a replacement item for those individuals that have damaged their lens. Extreme care must be used when handling this item as well as the Flat Flex cable connector on the PCBd. Be sure to not

This lens/sensor assembly is the same as is shipped in our Wide Angle camera packages. It is the latest "C" lens with the new wider body sensor housing. This is important to know, because it won't fit into the older housings. The width of the sensor housing in the area where it fits between the

This lens/sensor assembly is the same as is shipped in the Mobius-90 camera packages. It is intended to be a replacement item for those individuals that have damaged their lens, or for converting your standard Mobius camera to a Mobius-90 camera. The difference being, it creates letterbox video when the housing/buttons are facing left or right,