Misc
O-Ring Mounting Package
These rubber o-rings are a quick, easy, reusable mounting solution when used in conjunction with the Pro "V" Mount. They are an alternative to using the cable tie with the "V' mount. Very useful when mounting the Mobius to handlebars, roll bar or a scope. The package includes (3) different diameters to cover mounting to
Vibration Isolation Pad
This special vibration dampening material is a great addition to use with the Magnetic Mount included in the Pro & Pro16 packages for high vibration applications. It also has a very high coeificient of friction, which is great on those smooth surfaces at high speeds. Camera will not move! Pad measures 1.35" x 1.40"x .062 thk.
H&L, Re-usable Adhesive Inter-locking Mounting Strip
This is the same material used in our H&L, Re-usable Adhesive Inter-locking Mounting Package. This is great for adding additional mounting locations for you camera. This 3 inch length can be easily cut and applied to different items, thus offering greater versatility and usage of the Mobius camera. This is the industrial version of Velcro.
Velcro Straps 3/4" x 10" Lg
These are the same Velcro straps that come with the Helmet mount, they are 3/4in wide by 10 inches long with a plastic buckle on one end. The straps are heavy duty and have many uses. Color is Black Contents: Package of (4) Velcro straps
Mobius Weather Cover Replacement Windows
Replacement windows for use with the standard Mobius & Mobius2 Weather Cover. Package includes (10) replacement windows. (1) Package, (10) Windows Made inUSA
Samsung Micro SD to SD Card Adapter
This SD Card adapter allows you to remove the micro SD card from the Mobius Camera, then place in the adapter, which can then be inserted in the SD card slot on your computer. This allows for faster video/picture transfers than can be achieved by using the USB cable connected to the Mobius. Includes: (1)
H&L, Re-usable Adhesive Inter-locking Mounting Package
When using this mounting solution for the Mobius camera, you won't find a more robust, simple, compact mount. Not only does it offer tremendous strength, but it also gives adjust-ability and versatility. It also allows for quick mounting and dis-mounting. The H&L mount allows the Mobius to maintain it's small, compact form factor you have
Magnet Mounting Disk w/Tripod Mtg Thread
Using this Magnet Mounting disk allows expanded options when used with one of the "Pro" packages. It converts any mount that has the standard tripod thread (1/4-20) into a magnet mount; i.e. Suction Cup mount, Universal Mount, Tripods, Handheld mounts, etc. The Magnet Mounting in the Pro packages gives the camera a strong, rigid mounting,
Mobius OTG to Android Cable, 6 inch Lg
This is the cable you use to connect the Mobius or Mobius2 to a compatible Android phone, which when used in conjunction with the Android Mobius App, allows you to conficure the camera, view videos and file and see "Live" view of the camera. (good for pointing/aiming) Cable is 6 inches (150mm) long.
Mobius New A2 Replacement Lens
This replacement lens allows you to replace your damaged standard "A" or "A2" lens or convert your C2 lens Mobius. Note: opening of the camera case and re-focusing procedure required. (see below) Package includes: (1) Mobius New Standard "A2" lens/filter assembly (1) Hex Wrench Replacement Procedure: General Good Practice when handling electronics, Must read before
Dual USB Wall charger, 2 Prong
This dual port USB charger is capable of providing 1.0 & 2.1 amp output. It is a small package size, measuring 1 3/16 square by 1 3/8 inches long (30mm x 30mm x 35mm) color is White. This charger allows you to charge (2) Mobius cameras or any other devices which operate on USB power,
Mobius Standard "A" Replacement Lens
This replacement lens allows you to replace your damaged standard "A" lens or convert your C2 lens Mobius. Note: opening of the camera case and re-focusing procedure required. (see below) Package includes: (1) Mobius Standard "A" lens/filter assembly (1) Hex Wrench Replacement Procedure: General Good Practice when handling electronics, Must read before starting; whenever handling electronics,
Mobius Flexible Tripod Mount, 1/4-20 Thread
This is a small Tripod mount, measure 4.5 inches, and has a standard 1/4-20 tripod thread. The (3) legs can be bent into any position to give your Mobius camera stability for hands free recording. It also has a pocket clip for convenient carrying. Color is Black. Note: Camera not included Other Items you
Mobius C2 Wide Angle Replacement Lens
This replacement lens allows you to replace your damaged C2 lens or convert your standard "A" lens Mobius, or Mobius-90 camera to a wide Angle camera. Note: opening of the camera case and re-focusing procedure required. (see below) Package includes: (1) C2 Mobius Wide Angle lens/filter assembly (1) C2 Wide Angle lens cover (1) Hex
Mobius Super Capacitor Battery Replacement
This Super Capacitor is used to replace the standard LiPo battery that come in the Mobius & Mobius2 camera (will not fit Mobius Mini or the Maxi). The Super Capacitor is useful and suggested when using the Mobius ActionCam as a driving recorder where continuous power is supplied to the camera during operation. LiPo batteries
Mobius 8 Inch Lens Extension Cable
Using this Lens Extension Cable allows the Mobius Lens/Sensor assembly to be remotely mounted from the actual camera housing. This is great for applications where the camera can't be physically mounted or where you don't want the camera to be seen. Note: requires opening the Mobius case and handling the small flat flex cable and
9 1/2ft USB Cable, Std/Mini
This 9 1/2ft (3 meters) cable has the proper USB connectors to connect directly to the Mobius. Used to supply external power, or interface to the Mobius. Both connector ends are straight. Color is Black. Includes (10) adhesive backed cable clips
Weather Cover with Replaceable Windows for Mobius2
This is the same type of cover you have come to know for the standard Mobius! This silicone Weather Cover with replaceable windows helps keep the Mobius2 ActionCam clean and dry in messy conditions such as rain, snow, mud, dust, etc. Yet allows activation of the buttons as well as visibility of LED’s. The cover also
USB Power Supply, 2600mah, LED Indicator
This small, very compact design makes this USB power supply a great addition to the Mobius camera for extended recording or to just charge the camera or any other USB powered device; i.e. cell phone, etc. It measures .93 x .93 x 3.55in long. The power supply case is made from an aluminum extrusion and
Shielded Mobius Case
Do I need a Shielded Mobius Camera case? Read full description, details and test results here. Already have a Mobius and want a shielded camera? This package allows you to move the components from your camera and assemble them into this shielded case; you now have a shielded camera! If you are looking for a
Mobius Zoom/Magnification Replacement lens
This replacement lens allows you to replace your standard “A” or Wide Angle (B or C2) lens of your Mobius, Mobius-90 or Mobius Maxi (B/Wide Angle) camera turning it into a Zoom/magnification Mobius camera. The Lens has an 8x zoom/magnification. (see sample compare image below) This lens consists of high
Mobius2 & MobiusMini Actioncam Picatinny Gun Camera Mount
Just in time for hunting season! We are now taking orders for our new Picatinny Mobius Gun Mount!! This picatinny gun mount allows mounting of the Mobius2 & MobiusMini actioncam. Simply slide the mount onto your (1913 picatinny) rail in the desired position, tighten the thumb screw, then fasten your camera onto the mount. Works in
Magnet Mount Picatinny Gun Camera Mount
Just in time for hunting season! We are now taking orders for our new Picatinny Mobius Gun Mount!! This picatinny gun mount allows mounting of the Mobius, Mobius2 & MobiusMini actioncam. Simply slide the mount onto your (1913 picatinny) rail in the desired position, tighten the thumb screw, then fasten your camera onto the mount via your
Mobius Actioncam Picatinny Gun Camera Mount
Just in time for hunting season! We are now taking orders for our new Picatinny Mobius Gun Mount!! This picatinny gun mount allows mounting of the Mobius & Mobius-90 actioncam. Simply slide the mount onto your (1913 picatinny) rail in the desired position, tighten the thumb screw, then slide your camera into the mount. Works
USB Power Supply, 13000mah, Dual Port, LED Indicator
This sleek USB power supply has a whopping 13000 mah of USB power, which can be used by plugging your USB devices into either of the (2) supply ports (2.1Amp or 1.0Amp) The unit is very compact for this amount of capacity and measures; 5.5in x 2.5in x .75in and weighs 9.7 ounces. There is
Mobius-90 Replacement Lens/Sensor Assembly
This lens/sensor assembly is the same as is shipped in the Mobius-90 camera packages. It is intended to be a replacement item for those individuals that have damaged their lens, or for converting your standard Mobius camera to a Mobius-90 camera. The difference being, it creates letterbox video when the housing/buttons are facing left or right,