This steel, 1.50" diameter Magnet Mounting Disc is backed with 3M-VHB adhesive, and is colored Black. It allows you to mount the Mobius camera (using one of the Pro Packages) to any non-metallic surface by just simply peeling and sticking to any non-magnetic surface. Example; car dash board, plastic or fiberglass body of vehicle, top

When using this mounting solution for the Mobius camera, you won't find a more robust, simple, compact mount. Not only does it offer tremendous strength, but it also gives adjust-ability and versatility. It also allows for quick mounting and dis-mounting. The H&L mount allows the Mobius to maintain it's small, compact form factor you have

This replacement lens allows you to replace your damaged standard "A"  or "A2" lens or convert your C2 lens Mobius. Note: opening of the camera case and re-focusing procedure required. (see below) Package includes: (1) Mobius New Standard "A2"  lens/filter assembly (1) Hex Wrench Replacement Procedure: General Good Practice when handling electronics, Must read before

This dual port USB charger is capable of providing 1.0 & 2.1 amp output. It is a small package size, measuring 1 3/16 square by 1 3/8 inches long (30mm x 30mm x 35mm) color is White. This charger allows you to charge (2) Mobius cameras or any other devices which operate on USB power,

This is a small Tripod mount, measure 4.5 inches, and has a standard 1/4-20 tripod thread. The (3) legs can be bent into any position to give your Mobius camera stability for hands free recording. It also has a pocket clip for convenient carrying. Color is Black. Note: Camera not included    Other Items you

Using this Lens Extension Cable allows the Mobius Lens/Sensor assembly to be remotely mounted from the actual camera housing. This is great for applications where the camera can't be physically mounted or where you don't want the camera to be seen. Note: requires opening the Mobius case and handling the small flat flex cable and

This 9 1/2ft (3 meters) cable has the proper USB connectors to connect directly to the Mobius. Used to supply external power, or interface to the Mobius. Both connector ends are straight. Color is Black. Includes (10) adhesive backed cable clips

This is the same type of cover you have come to know for the standard Mobius! This silicone Weather Cover with replaceable windows helps keep the Mobius2 ActionCam clean and dry in messy conditions such as rain, snow, mud, dust, etc. Yet allows activation of the buttons as well as visibility of LED’s. The cover also

Just in time for hunting season! We are now taking orders for our new Picatinny Mobius Gun Mount!! This picatinny gun mount allows mounting of the Mobius, Mobius2 & MobiusMini actioncam. Simply slide the mount onto your (1913 picatinny) rail in the desired position, tighten the thumb screw, then fasten your camera onto the mount via your

Just in time for hunting season! We are now taking orders for our new Picatinny Mobius Gun Mount!! This picatinny gun mount allows mounting of the Mobius2 & MobiusMini actioncam. Simply slide the mount onto your (1913 picatinny) rail in the desired position, tighten the thumb screw, then fasten your camera onto the mount. Works in

Just in time for hunting season! We are now taking orders for our new Picatinny Mobius Gun Mount!! This picatinny gun mount allows mounting of the Mobius & Mobius-90 actioncam. Simply slide the mount onto your (1913 picatinny) rail in the desired position, tighten the thumb screw, then slide your camera into the mount. Works

This sleek USB power supply has a whopping 13000 mah of USB power, which can be used by plugging your USB devices into either of the (2) supply ports (2.1Amp or 1.0Amp) The unit is very compact for this amount of capacity and measures; 5.5in x 2.5in x .75in and weighs 9.7 ounces. There is

This lens/sensor assembly is the same as is shipped in the Mobius-90 camera packages. It is intended to be a replacement item for those individuals that have damaged their lens, or for converting your standard Mobius camera to a Mobius-90 camera. The difference being, it creates letterbox video when the housing/buttons are facing left or right,