This special vibration dampening material is a great addition to use with the Magnetic Mount included in the Pro & Pro16 packages for high vibration applications. It also has a very high coeificient of friction, which is great on those smooth surfaces at high speeds. Camera will not move! Pad measures 1.35" x 1.40"x .062 thk.
This is the same material used in our H&L, Re-usable Adhesive Inter-locking Mounting Package. This is great for adding additional mounting locations for you camera. This 3 inch length can be easily cut and applied to different items, thus offering greater versatility and usage of the Mobius camera. This is the industrial version of Velcro.
These rubber o-rings are a quick, easy, reusable mounting solution when used in conjunction with the Pro "V" Mount. They are an alternative to using the cable tie with the "V' mount. Very useful when mounting the Mobius to handlebars, roll bar or a scope. The package includes (3) different diameters to cover mounting to
Mount screw used in the Mobius "Pro" packages. This is a special thread forming screw for plastic; #2 x .50 inch lg. It's special tri-lobe design insures a strong hold and allows for repeated insertions without stripping. Notes: Zinc plated; #1 Philips driver required for proper fit. Package Includes: (2) #2 x .50Lg mount screws
These are the same Velcro straps that come with the Helmet mount, they are 3/4in wide by 10 inches long with a plastic buckle on one end. The straps are heavy duty and have many uses. Color is Black Contents: Package of (4) Velcro straps
This steel, 1.50" diameter Magnet Mounting Disc is backed with 3M-VHB adhesive, and is colored Black. It allows you to mount the Mobius camera (using one of the Pro Packages) to any non-metallic surface by just simply peeling and sticking to any non-magnetic surface. Example; car dash board, plastic or fiberglass body of vehicle, top
Using this Magnet Mounting disk allows expanded options when used with one of the "Pro" packages. It converts any mount that has the standard tripod thread (1/4-20) into a magnet mount; i.e. Suction Cup mount, Universal Mount, Tripods, Handheld mounts, etc. The Magnet Mounting in the Pro packages gives the camera a strong, rigid mounting,
When using this mounting solution for the Mobius camera, you won't find a more robust, simple, compact mount. Not only does it offer tremendous strength, but it also gives adjust-ability and versatility. It also allows for quick mounting and dis-mounting. The H&L mount allows the Mobius to maintain it's small, compact form factor you have
These plastic clips have a peel and stick adhesive backing, which helps you route your cable and keep it in place. They are 5/8 inch (16mm) square, accept a cable up to .20 inch (5mm) in diameter, and are Black. Packages Includes: (10) Clips
By simply screwing this adapter to the 1/4-20 Tripod mount on the Mobius ActionCam allows you to use your camera with all existing GoPro mounts. Measures 1.10 (28mm) diameter x 1.20 (30.5mm) Package includes: (1) GoPro Mount Adapter Other Items You May Want:
This ultra small suctioncup mount allows mounting of any device that uses the standard tripod mount thread (1/4-20). It has a ball and socket which allows for universal mounting and full adjustability and is locked into place using the thumb wheel. This is an excellent solution for windshield mounting the Mobius ActionCam for use as
This is a (4) pack of the peel & stick adhesive mounting bases that are used with the Universal Helmet Mount. Placing these in multiple locations allows quick removal and placement of your Mobius Camera.
This is a small Tripod mount, measure 4.5 inches, and has a standard 1/4-20 tripod thread. The (3) legs can be bent into any position to give your Mobius camera stability for hands free recording. It also has a pocket clip for convenient carrying. Color is Black. Note: Camera not included Other Items you
This right angle magnet mounting bracket works in conjunction with the Triped magnet mount found in the Mobius Pro packages as well as the Mobius Bodycam/Wearable camera packages. It has a VHB peel and stick adhesive base which allows mounting to virtually anything. This mount allows the Mobius-90 Bodycam to also be used as a
This mount can be used to mount the Mobius to the side or top of a helmet/surface. (or any other horizontal or vertical surface) This mount utilizes the standard tripod thread to mount to the camera. The base is flat and has 3M-VHB adhesive, it will contour slightly to a curved surface. It also has
Simply sliding the Magnet Mounting Clip/Hat Clip over the brim or visor of a hat allows you to quickly and easily mount the Mobius Actioncam (using the Pro Package), or the Mobius2 (using the Mobius2/Mobius Mini Pro2 Mounting Package) as a wearable camera. Its two leaf design allows you to bend one of the leafs
The Mobius2/Mobius Mini Quick (Pro2) Mount package allows you to easily add alternative mounting methods to the Mobius2 Basic ActionCam, or the new Mobius Mini; such as our proprietary magnet mounting system, beyond the standard 1/4-20 tripod mount. With the elimination of the mounting sleeve (quick mount/dis-mounting), This mount allow the camera to be quickly,
The MobiusMaxi "Pro" Mounting Package contains the same great mounts included in the Pro & Pro16G packages, the "V" Bar mount & the Magnet mount. The "V" mount creates a quick, simple, low profile lite mounting solution to mount the Mobius camera to a bar or cylindrical shaped object; such as handle bars, roll bar,
Just in time for hunting season! We are now taking orders for our new Picatinny Mobius Gun Mount!! This picatinny gun mount allows mounting of the Mobius2 & MobiusMini actioncam. Simply slide the mount onto your (1913 picatinny) rail in the desired position, tighten the thumb screw, then fasten your camera onto the mount. Works in
Just in time for hunting season! We are now taking orders for our new Picatinny Mobius Gun Mount!! This picatinny gun mount allows mounting of the Mobius, Mobius2 & MobiusMini actioncam. Simply slide the mount onto your (1913 picatinny) rail in the desired position, tighten the thumb screw, then fasten your camera onto the mount via your
The Mobius "Pro" Mounting Package contains the same great mounts included in the Pro & Pro16G packages, the "V" Bar mount & the Magnet mount. The "V" mount creates a quick, simple, low profile lite mounting solution to mount the Mobius camera to a bar or cylindrical shaped object; such as handle bars, roll bar,
This small, compact, lite weight mount has a 5/16" slot which allows it to be mounted to the bow behind the Stabilizer. This turns your popular bow, PSE, Mathews, Hoyt, BowTech or Bear into a "Bow Cam" or "Hunting cam"; allowing you to record all your hunting experiences in full 1080HD video. The mount is
Just in time for hunting season! We are now taking orders for our new Picatinny Mobius Gun Mount!! This picatinny gun mount allows mounting of the Mobius & Mobius-90 actioncam. Simply slide the mount onto your (1913 picatinny) rail in the desired position, tighten the thumb screw, then slide your camera into the mount. Works