Using this Lens Extension Cable allows the Mobius Lens/Sensor assembly to be remotely mounted from the actual camera housing. This is great for applications where the camera can’t be physically mounted or where you don’t want the camera to be seen.
Note: requires opening the Mobius case and handling the small flat flex cable and ZIF connectors. Some familiarity of this type of work and components is recommended due to the delicate nature. (ZIF = Zero Insertion Force, connectors are actuated by flipping the Black/dark colored bar, UP, opposite the finger insertion side before inserting the finger edge, then once fully inserted, press the bar back down. Do not force the cable into connector.
It is also a good idea to disconnect the battery during this installation process.
- 8 inch interconnect cable
- (1) Cable Interface Board
1. Not compatible with Mobius2 or MobiusMini